A rugged, highly versatile jack, 7000 lb. capacity, can be used for lifting, pulling or winching, NATO approved.

The 48" Hi-Lift Extreme Edition is an All-Cast version that comes standard with a unique Winch/Clamp/Spreader attachment for clamping and spreading with the Jack. It features a metallic gray powder-coat finish and a gold zinc-plated handle and clamp. The 48" Hi-Lift Extreme Edition also features a hinged, quick-release base pin instead of the standard cotter pin for easier removal of the jack base.

A convenient mounting and locking device for storage of your Hi-Lift Jack. Installation is simple.  It can be mounted horizontally or vertically, with or without a Jack Protector.  Your Hi-Lift Jack is mounted in the Loc-Rac to deter theft.  It also places the Jack in an easy to reach location.

The Hi-Lift 4XRAC is designed for serious off-roaders who are looking for an easy, inexpensive way to stow their Hi-Lift Jack in a convenient, secure location. Mounting brackets are slotted for adjustment. Velcro handle strap secures handle to jack bar. Each kit contains 2 mounting brackets, 2 mounting bracket caps, a Velcro strap for securing the Hi-Lift's handle and all necessary mounting hardware.

The Bumper Lift is designed to fit most steel curved bumpers, for quick and easy lifting.  The Bumper Lift has a 3,000lb(1361 kg) capacity. When used with the Hi-Lift Jack, which is not itself designed to be used on curved bumpers, the Bumper Lift makes raising one wheel of most average sized vehicles up to 2" (5 cm) above the ground an easy task.

Now lift late-model vehicles with the Hi-Lift jack! Plastic bumpers and extreme lift-kits are no longer a problem. The Lift-Mate is designed to operate in a manner that allows the vehicle to be lifted directly from the wheel, greatly reducing the amount of travel up the jack bar. 
- Lift Capacity: 5000 lbs.(2273 kg)
- Rubber-Coated hooks to protect the wheel.
- Rubber pad for protecting the tire and wheel.

SINK NO MORE! The Off-Road Base from Hi-Lift Makes the "original power tool" even more versatile! Convenient to use, easy to store. Rugged construction meets Hi-Lift Jack specifications for strength & durability. Use the Hi-Lift Off-Road Base to alleviate jack sinkage on soft ground.

Everything You Need to Winch with the Hi-Lift Jack - All in one convenient case! Use the Off-Road Kit to turn your Hi-Lift Jack into an even more versatile tool. This kit keeps all of the needed parts for winching at arms reach. Includes: Winch Tensioner, Custom Nose Attachment, 8 ft. Tree Saver Strap, Hi-Lift Gloves, Hardware & Gear Bag.

Protects your Hi-Lift Jack from weather, mud, and dirt. Made of durable vinyl-coated nylon, the Jack Protector is waterproof, as well as mildew and decay resistant.

A "must-have" for any Hi-Lift owner, it slips over the top clamp and onto the beam, and keeps the handle in a secured,  up-right position. Can be removed quickly and easily without removing the top clamp, a feature that the imitators cannot claim.

The rugged Australian T-MAX range of winches offer features usually found on more expensive brands: Single line pull, heavy duty series-wound motor, intelligent remote control system, galvanized aircraft cable, replaceable c levis hook, automatic in-drum braking, sliding ring-gear clutch. Roller fairlead included.
9500 lb. - $695.00
11000 lb. - $795.00

The “Big Daddy” of the TMax line, this winch will recover any Rover with authority. The 6.6HP Series Wound Motor makes a heavy recovery possible even on a short-line pull. The extra capacity allows for multiple recoveries without overheating and ensures that whether you explore alone or with others, your winch is up to the task. The full size wireless remote works well with gloves- another TMax exclusive. Fits our line of winch-bumpers.
"...One of the highest quality winches for around a hundred bucks less than what a comparable winch would cost." - Petersen's 4-Wheel & Off-Road
12,000lb. rated line pull
Wireless Multi-Control Remote
6.6HP Series Wound Motor
Stainless Steel Clutch and Hardware
Safety Alert Light
Galvanized Aircraft Grade Cable
Roller Fairlead included

Made of 6 mm steel plate and nylon coated. No drilling or modification required other than the removal of the front spoiler. The integrated bumper is fully compatible with the aluminum sump guard (BA083). The BA 175 can take the following winches: Warn 6000 or 8000 “M” and “Mx” series as well as the XD 9000 and the T-Max 9000 or 11000. (winch not included)

A-frame for the integrated bumper and winch mount shown above. Easy bolt-on installation. Black nylon coated and with the facility to mount spot lamps. Requires BA175 Winch Bumper shown above.

Discreet under bumper mount for the Warn 8000 lb. or T-Max 9500 lb. winches. Bolts directly to chassis, and will accommodate our line of brush bars. Some bumper/spoiler trimming required.

Click Here for applications.

Wireless remote control for T-Max or similar winches. Waterproof design for when the going gets tough. Allows for operator control from a safe distance, and includes an emergency connector cable in case of battery failure.

4.75 ton working load limit, 38,000lb test  strength. ISO certified and features a tough powder coat finish.

D.A.P.'s exclusive WinchSafe™ winch line is made from materials supplied by Samson, the premier manufacturer of synthetic lines. The 80 foot line is made from Samson's 12-Strand AmSteel Blue, a Twelve-Strand single braid that is the world's strongest fiber with a 20,000 lb. test strength! The WinchSafe™ winch line is orange in colour, making it far more visible and therefore safer to use than other synthetic and steel rope. 3/8" in diameter, weighing 3.6 lbs per 100' and the extremely low stretch makes this line much safer and easier to use than steel cable. D.A.P. also includes the Winch Safety Thimble™ Eye professionally preinstalled with Samson's "Class II" splicing method. The large diameter and lightweight Winch Safety Thimble™ Eye will not pull through or damage your fairlead, especially the newer style soft aluminium and plastic types. The Thimble also negates the need for a heavy hook by allowing you to connect a standard shackle directly. We feel our exclusive WinchSafe™ winch line is the safest option on the market for off-road recovery, which is often the most dangerous part of off-road driving.

The latest addition to our WinchSafe line, this 25 foot 3/8" Amsteel extension is rated to 19,600 lbs. Extensions prove useful in countless ways during recoveries, especially when that perfect tree is just a little outside the reach of the winch line. Equipped with a chafe guard and crush proof tubular ends in our trademark WinchSafe Orange.

Our WinchSafe Rope Retainer™ will ensure that your wire or synthetic line will not spool out too far and slip off the drum. Remember that all winch manufacturers assert that five wraps of line should be maintained at all times. Made by CMI®, the leader in rescue and mountaineering equipment, the Rope Retainer™ will stop your line before it's too late. Available in blue or orange to match or contrast your rig. For a limited time, purchase any winch or synthetic WinchSafe™ rope and we will give you a FREE Rope Retainer™!

Our TMax winch pulley can make even the most unusual winch recovery far easier. Rated at 17,632lbs (8000kg), the heaviest Rover is easily handled. Easy to see yellow color and supplied with protective case.

A roller fairlead softens cable pull angles and prolongs cable life by reducing wear and drag.

A perfect compliment to our WinchSafe™ Synthetic Winch Rope.

Everything you need for safe winching in one convenient storage/carrying case. Contains: tree strap, snatch block, 2 x D shackles, safety gloves, tow hook, and carrying case.

Here’s an accessory kit that no winch owner should be without. It includes: snatch block, tree strap, winching gloves, shackle, choker chain, and a heavy-weight nylon case.

Fits all Class III receivers, and features a heavy 3/4" diameter shackle.

This very heavy-duty piece features a full 360 degree rotation, a sturdy 1/2" shackle hoop with an effective 1-1/2" throat. Yellow cad plated for corrosion resistance. The base measures 4.5" x 3" and includes a 1/2" thick backing plate. Perfect for mounting to winch bumpers or cross- members.

Welded steel construction, yellow cad plated, includes mounting hardware.

This WinchSafe™ Recovery Strap is 2” wide and 30’ long which should accommodate the bulk of common recoveries. The 2” width allows for use in a Class III receiver hitch if necessary, although plenty strong with a breaking strength of 20,000lbs. Manufactured in the USA using the lockstitch process, the reversible end loops are fully wrapped in Cordura® and also feature Cordura® anti-abrasion sleeves which can be moved along the length of the strap. Includes an attached elastic band to keep everything nicely wrapped when not in use. There are clever copies and “re-brands” of this strap hitting the market, but this is the original Winchsafe™ strap in the trademark WinchSafe™ Orange.
LRA072A - 2" x 30'

A “must-have” accessory for winch recovery. 30,000 lb.. rating will compliment your winch cable without damaging trees or other anchor points. 3” x 6’

Dual purpose mechanism made from zinc plated box section steel. Cleverly folds to act as an anchor for the vehicle when pulling. Or when laid flat it doubles as a useful track to help you get out of tricky situations.

A kit of sturdy components to give your winch an anchor point when there's no other secure location within reach. Zinc plated steel components.

The Pull Pal, a well-engineered anchoring tool, is both portable and well-suited for a wide range of environments. Intended as a tool for winching through sand and mud, Pull Pal's design relies on useful rules of physics. Its hefty plow blade sets firmly and safely into sand, clay, mud, hardpan soil and snow. Pull Pal gets you up and over hill stalls and minimizes dangerous situations. It allows you more control -- even when you are alone. Saves time, transmissions, and tires. The RW11,000 size unit is 45" x 7" folded; Spade 10" x 24", weighs only 36 lbs, and is recommended for 4 x 4 mid-size trucks. The Pull-Pal comes with a detachable spade and folds to the size of an ordinary bumper jack for easy storage. Designed to work in most types of ground (including sand, hard-pan soil and even snow.) It can be used to extract your vehicle as well as an anchoring point from the rear when winching another vehicle out.

Watch movie (wmv 2.7MB)

ORDER HOTLINE 800-955-2818 (for orders only)
All other inquiries call  802-885-6660
Monday - Friday, 8AM - 6PM Eastern Time (USA)

Prices, availability, specifications, and applications subject to change without notice.
Manufacturer part numbers used for reference only. Shipping not included in price.
"Land Rover", "Range Rover", "Discovery", "Defender", "Freelander"
are registered trademarks of Land Rover North America.
Web site and photos Copyright © 1998-2009 D.A.P. Enterprises LLC