A rugged, highly versatile jack, 7000 lb. capacity, can be used for lifting, pulling or winching, NATO approved.

The 48" Hi-Lift Extreme Edition is an All-Cast version that comes standard with a unique Winch/Clamp/Spreader attachment for clamping and spreading with the Jack. It features a metallic gray powder-coat finish and a gold zinc-plated handle and clamp. The 48" Hi-Lift Extreme Edition also features a hinged, quick-release base pin instead of the standard cotter pin for easier removal of the jack base.

A convenient mounting and locking device for storage of your Hi-Lift Jack. Installation is simple.  It can be mounted horizontally or vertically, with or without a Jack Protector.  Your Hi-Lift Jack is mounted in the Loc-Rac to deter theft.  It also places the Jack in an easy to reach location.

The Hi-Lift 4XRAC is designed for serious off-roaders who are looking for an easy, inexpensive way to stow their Hi-Lift Jack in a convenient, secure location. Mounting brackets are slotted for adjustment. Velcro handle strap secures handle to jack bar. Each kit contains 2 mounting brackets, 2 mounting bracket caps, a Velcro strap for securing the Hi-Lift's handle and all necessary mounting hardware.

The Bumper Lift is designed to fit most steel curved bumpers, for quick and easy lifting.  The Bumper Lift has a 3,000lb(1361 kg) capacity. When used with the Hi-Lift Jack, which is not itself designed to be used on curved bumpers, the Bumper Lift makes raising one wheel of most average sized vehicles up to 2" (5 cm) above the ground an easy task.

Now lift late-model vehicles with the Hi-Lift jack! Plastic bumpers and extreme lift-kits are no longer a problem. The Lift-Mate is designed to operate in a manner that allows the vehicle to be lifted directly from the wheel, greatly reducing the amount of travel up the jack bar. 
- Lift Capacity: 5000 lbs.(2273 kg)
- Rubber-Coated hooks to protect the wheel.
- Rubber pad for protecting the tire and wheel.

SINK NO MORE! The Off-Road Base from Hi-Lift Makes the "original power tool" even more versatile! Convenient to use, easy to store. Rugged construction meets Hi-Lift Jack specifications for strength & durability. Use the Hi-Lift Off-Road Base to alleviate jack sinkage on soft ground.

Everything You Need to Winch with the Hi-Lift Jack - All in one convenient case! Use the Off-Road Kit to turn your Hi-Lift Jack into an even more versatile tool. This kit keeps all of the needed parts for winching at arms reach. Includes: Winch Tensioner, Custom Nose Attachment, 8 ft. Tree Saver Strap, Hi-Lift Gloves, Hardware & Gear Bag.

Protects your Hi-Lift Jack from weather, mud, and dirt. Made of durable vinyl-coated nylon, the Jack Protector is waterproof, as well as mildew and decay resistant.

A "must-have" for any Hi-Lift owner, it slips over the top clamp and onto the beam, and keeps the handle in a secured,  up-right position. Can be removed quickly and easily without removing the top clamp, a feature that the imitators cannot claim.

This black nylon coated winch mounting plate mounts to our  BFA1007 Heavy Duty A-frame brush bar (shown above), and accepts Superwinch or T-MAX 4500 (winch sold separately).

Lightweight and compact, this neat little package offers lots of pulling power for it's size. It weighs-in under 40 lbs, comes with a built-in roller fairlead, remote control, and 40 feet of cable. Suitable for the Freelander winch plate.

Wireless remote control for T-Max or similar winches. Waterproof design for when the going gets tough. Allows for operator control from a safe distance, and includes an emergency connector cable in case of battery failure.

4.75 ton working load limit, 38,000lb test  strength. ISO certified and features a tough powder coat finish.

The latest addition to our WinchSafe line, this 25 foot 3/8" Amsteel extension is rated to 19,600 lbs. Extensions prove useful in countless ways during recoveries, especially when that perfect tree is just a little outside the reach of the winch line. Equipped with a chafe guard and crush proof tubular ends in our trademark WinchSafe Orange.

Our TMax winch pulley can make even the most unusual winch recovery far easier. Rated at 17,632lbs (8000kg), the heaviest Rover is easily handled. Easy to see yellow color and supplied with protective case.

Everything you need for safe winching in one convenient storage/carrying case. Contains: tree strap, snatch block, 2 x D shackles, safety gloves, tow hook, and carrying case.

Here’s an accessory kit that no winch owner should be without. It includes: snatch block, tree strap, winching gloves, shackle, choker chain, and a heavy-weight nylon case.

Fits all Class III receivers, and features a heavy 3/4" diameter shackle.

This very heavy-duty piece features a full 360 degree rotation, a sturdy 1/2" shackle hoop with an effective 1-1/2" throat. Yellow cad plated for corrosion resistance. The base measures 4.5" x 3" and includes a 1/2" thick backing plate. Perfect for mounting to winch bumpers or cross- members.

This WinchSafe™ Recovery Strap is 2” wide and 30’ long which should accommodate the bulk of common recoveries. The 2” width allows for use in a Class III receiver hitch if necessary, although plenty strong with a breaking strength of 20,000lbs. Manufactured in the USA using the lockstitch process, the reversible end loops are fully wrapped in Cordura® and also feature Cordura® anti-abrasion sleeves which can be moved along the length of the strap. Includes an attached elastic band to keep everything nicely wrapped when not in use. There are clever copies and “re-brands” of this strap hitting the market, but this is the original Winchsafe™ strap in the trademark WinchSafe™ Orange.
LRA072A - 2" x 30'

A “must-have” accessory for winch recovery. 30,000 lb.. rating will compliment your winch cable without damaging trees or other anchor points. 3” x 6’

Dual purpose mechanism made from zinc plated box section steel. Cleverly folds to act as an anchor for the vehicle when pulling. Or when laid flat it doubles as a useful track to help you get out of tricky situations.

A kit of sturdy components to give your winch an anchor point when there's no other secure location within reach. Zinc plated steel components.

ORDER HOTLINE 800-955-2818 (for orders only)
All other inquiries call  802-885-6660
Monday - Friday, 8AM - 6PM Eastern Time (USA)

Prices, availability, specifications, and applications subject to change without notice.
Manufacturer part numbers used for reference only. Shipping not included in price.
"Land Rover", "Range Rover", "Discovery", "Defender", "Freelander"
are registered trademarks of Land Rover North America.
Web site and photos Copyright © 1998-2009 D.A.P. Enterprises LLC