Both stylish and functional, dress up your Defender or Discovery with these new aluminum shift knobs from Bearmach. Buy directly from DAP, the only authorized Bearmach distributor in the USA, to avoid the poor quality copies! Transmission shift knob is intended only for vehicles equipped with the R380 transmission (note the location of reverse if you are unsure which transmission you have). Transfer case shift knob fits all Discovery and Defender models.

Transmission Knob, Discovery I & Defender with R380 - BA3840, $36.95
Transfer Box Knob, Discovery I & Defender - BA3841, $36.95

These quality made custom lamps will add that custom touch to your Discovery I that nobody else has. Complete housing with clear lenses includes proper color bulbs and sockets. Easy ten minute installation and cheaper than the originals to replace! Sold in pairs.

Front Signal Lamps, Discovery I - AMR6511/2W, $99.90 / pair
Rear Bumper Lamps, Discovery I - AMR6509/10W $59.90 / pair

With the SPOT Satellite Messenger, you and your loved ones have peace of mind knowing help is always within reach. SPOT is the only device of its kind, using the GPS satellite network to acquire its coordinates, and then sending its location – with a link to Google Maps™ – and a pre-programmed message via a commercial satellite network. And unlike Personal Locator Beacons, SPOT does more than just call for help. Tracking your progress, checking in with loved ones, and non-emergency assistance are also available, all at the push of a button. And because it uses 100% satellite technology, SPOT works around the world – even where cell phones don't. Whether you’re just checking in, allowing others to track your progress, or calling for help – SPOT gives you a vital line of communication with friends and family when you want it, and emergency assistance when and where you need it. And since it utilizes 100% satellite technology, SPOT works around the world – even where cell phones don’t.  

A “must have” for those on the go, the Ka-Bar Hobo Tool provides a knife, fork and spoon as well as can opener. Why carry environmentally unfriendly plastic utensils which not only fill our landfills, but break and melt? Quality made by Ka-Bar.

The New Hella Tire Pressure Monitoring System is now available. This is not only a safety device, but it is also a money saving device in that it extends tire life by constantly monitoring the pressure and temperature of your tires. Most tire failures are due to improper tire inflation causing higher temperatures in the sidewalls of your tires and premature wear or failure. In addition to the monitoring function, there is also an user adjustable audible alarm. The display is adjustable for different colors to match your vehicle's interior lighting scheme. The system includes 4 sensors and can be expanded to 7 sensors.

Our friends at Burgess Productions have released this two DVD set of Odyssey: Driving Around the World. A must-have for any Rover enthusiast, this 2 disc set includes all thirteen episodes which have aired on TV around the world. You’ve seen the Mobil 1 commercials, now see what is behind the scenes as a diverse and adventure minded group share the ups and downs of driving, literally, around the world in tricked out Rovers. *Volume discounts for clubs and dealers- just ask!

Factory Service, Electrical, Parts and owners manuals on CD.
Available for Range Rover Classic, Discovery 1, Defender and Series Land Rovers.

Attractive mugs decorated with a color illustration of the Land Rover of your choice and the Land Rover logo on the inside. Each individually boxed.
BAG 871 – Discovery, BAG 872 – Land Rover 88, BAG 876 – Defender

A rugged, highly versatile jack, 7000 lb. capacity, can be used for lifting, pulling or winching, NATO approved.

The 48" Hi-Lift Extreme Edition is an All-Cast version that comes standard with a unique Winch/Clamp/Spreader attachment for clamping and spreading with the Jack. It features a metallic gray powder-coat finish and a gold zinc-plated handle and clamp. The 48" Hi-Lift Extreme Edition also features a hinged, quick-release base pin instead of the standard cotter pin for easier removal of the jack base.

A convenient mounting and locking device for storage of your Hi-Lift Jack. Installation is simple.  It can be mounted horizontally or vertically, with or without a Jack Protector.  Your Hi-Lift Jack is mounted in the Loc-Rac to deter theft.  It also places the Jack in an easy to reach location.

The Hi-Lift 4XRAC is designed for serious off-roaders who are looking for an easy, inexpensive way to stow their Hi-Lift Jack in a convenient, secure location. Mounting brackets are slotted for adjustment. Velcro handle strap secures handle to jack bar. Each kit contains 2 mounting brackets, 2 mounting bracket caps, a Velcro strap for securing the Hi-Lift's handle and all necessary mounting hardware.

The Bumper Lift is designed to fit most steel curved bumpers, for quick and easy lifting.  The Bumper Lift has a 3,000lb(1361 kg) capacity. When used with the Hi-Lift Jack, which is not itself designed to be used on curved bumpers, the Bumper Lift makes raising one wheel of most average sized vehicles up to 2" (5 cm) above the ground an easy task.

Now lift late-model vehicles with the Hi-Lift jack! Plastic bumpers and extreme lift-kits are no longer a problem. The Lift-Mate is designed to operate in a manner that allows the vehicle to be lifted directly from the wheel, greatly reducing the amount of travel up the jack bar. 
- Lift Capacity: 5000 lbs.(2273 kg)
- Rubber-Coated hooks to protect the wheel.
- Rubber pad for protecting the tire and wheel.

SINK NO MORE! The Off-Road Base from Hi-Lift Makes the "original power tool" even more versatile! Convenient to use, easy to store. Rugged construction meets Hi-Lift Jack specifications for strength & durability. Use the Hi-Lift Off-Road Base to alleviate jack sinkage on soft ground.

Everything You Need to Winch with the Hi-Lift Jack - All in one convenient case! Use the Off-Road Kit to turn your Hi-Lift Jack into an even more versatile tool. This kit keeps all of the needed parts for winching at arms reach. Includes: Winch Tensioner, Custom Nose Attachment, 8 ft. Tree Saver Strap, Hi-Lift Gloves, Hardware & Gear Bag.

Protects your Hi-Lift Jack from weather, mud, and dirt. Made of durable vinyl-coated nylon, the Jack Protector is waterproof, as well as mildew and decay resistant.

A "must-have" for any Hi-Lift owner, it slips over the top clamp and onto the beam, and keeps the handle in a secured,  up-right position. Can be removed quickly and easily without removing the top clamp, a feature that the imitators cannot claim.

The rugged Australian T-MAX range of winches offer features usually found on more expensive brands: Single line pull, heavy duty series-wound motor, intelligent remote control system, galvanized aircraft cable, replaceable c levis hook, automatic in-drum braking, sliding ring-gear clutch. Roller fairlead included.
9500 lb. - $695.00
11000 lb. - $795.00

The “Big Daddy” of the TMax line, this winch will recover any Rover with authority. The 6.6HP Series Wound Motor makes a heavy recovery possible even on a short-line pull. The extra capacity allows for multiple recoveries without overheating and ensures that whether you explore alone or with others, your winch is up to the task. The full size wireless remote works well with gloves- another TMax exclusive. Fits our line of winch-bumpers.
"...One of the highest quality winches for around a hundred bucks less than what a comparable winch would cost." - Petersen's 4-Wheel & Off-Road
12,000lb. rated line pull
Wireless Multi-Control Remote
6.6HP Series Wound Motor
Stainless Steel Clutch and Hardware
Safety Alert Light
Galvanized Aircraft Grade Cable
Roller Fairlead included

Wireless remote control for T-Max or similar winches. Waterproof design for when the going gets tough. Allows for operator control from a safe distance, and includes an emergency connector cable in case of battery failure.

These 3/4" shackles are the best in the business. Clearly marked Working Load Limit of 4.75 tons and no “Made in China” anywhere to be seen. The shackle is the core of any recovery kit and is not the place to try to save a couple dollars. ARB207

D.A.P.'s exclusive WinchSafe™ winch line is made from materials supplied by Samson, the premier manufacturer of synthetic lines. The 80 foot line is made from Samson's 12-Strand AmSteel Blue, a Twelve-Strand single braid that is the world's strongest fiber with a 20,000 lb. test strength! The WinchSafe™ winch line is orange in colour, making it far more visible and therefore safer to use than other synthetic and steel rope. 3/8" in diameter, weighing 3.6 lbs per 100' and the extremely low stretch makes this line much safer and easier to use than steel cable. D.A.P. also includes the Winch Safety Thimble™ Eye professionally preinstalled with Samson's "Class II" splicing method. The large diameter and lightweight Winch Safety Thimble™ Eye will not pull through or damage your fairlead, especially the newer style soft aluminium and plastic types. The Thimble also negates the need for a heavy hook by allowing you to connect a standard shackle directly. We feel our exclusive WinchSafe™ winch line is the safest option on the market for off-road recovery, which is often the most dangerous part of off-road driving.

Another solution in our WinchSafe line of recovery equipment is the BA8003A. Supplied in the trademark WinchSafe Orange, this line is Amsteel 3/8" and rated to 19,600lbs. The aluminum Safety Thimble weighs on 9 oz and negates the need for a hook- connecting directly to a shackle for safety.
Amsteel line is made from Samson's 12-strand single braid and professionally terminated to provide years of safe winching.
80' in length, this line will fit all modern winches. The shorter length means the ability to use a stronger line on some of the smaller winches and also means more pulling power by using the inner wraps on the drum for the same length pull vs. 100 foot lines.

The latest addition to our WinchSafe line, this 25 foot 3/8" Amsteel extension is rated to 19,600 lbs. Extensions prove useful in countless ways during recoveries, especially when that perfect tree is just a little outside the reach of the winch line. Equipped with a chafe guard and crush proof tubular ends in our trademark WinchSafe Orange.

Our WinchSafe Rope Retainer™ will ensure that your wire or synthetic line will not spool out too far and slip off the drum. Remember that all winch manufacturers assert that five wraps of line should be maintained at all times. Made by CMI®, the leader in rescue and mountaineering equipment, the Rope Retainer™ will stop your line before it's too late. Available in blue or orange to match or contrast your rig. For a limited time, purchase any winch or synthetic WinchSafe™ rope and we will give you a FREE Rope Retainer™!

A pulley should be one of the most carefully assessed pieces of equipment you buy. A poorly designed block can have a detrimental effect on a winch's cable, and lead to a failure of the winch cable or the snatch block itself. Inferior designs on the market have casting flaws which will damage your expensive cable. Unlike inferior designs flooding the market, ARB pullies feature side plates that sit snug against the pulley, eliminating the possibility of the winch cable becoming trapped between the pulley and the side plates. The groove on the pulley itself tapers down to the center allowing for a variety of cable sizes (1/4"-1/2") to be used and ensures the cable is seated securely in the pulley, minimizing lateral movement. To ensure smooth pulley operation, the hardened steel pin is fitted with a nipple, to which grease can be periodically applied. How many of those cheap Chinese pullies have that feature? The ARB snatch block is a formidable piece of recovery equipment that should be included in every recovery kit. D.A.P. suggests specific recovery training before using advanced recovery techniques. ARB209

A roller fairlead softens cable pull angles and prolongs cable life by reducing wear and drag.

A perfect compliment to our WinchSafe™ Synthetic Winch Rope.

ARB's large style bag is designed to fit a complete recovery kit including snatch strap, tree trunk protector, winch extension strap, snatch block, recovery damper, D shackles and gloves (sold separately). ARB501

Fits all Class III receivers, and features a heavy 3/4" diameter shackle.

This very heavy-duty piece features a full 360 degree rotation, a sturdy 1/2" shackle hoop with an effective 1-1/2" throat. Yellow cad plated for corrosion resistance. The base measures 4.5" x 3" and includes a 1/2" thick backing plate. Perfect for mounting to winch bumpers or cross- members.

Welded steel construction, yellow cad plated, includes mounting hardware.

Forged steel construction, as supplied to the British Military, includes Grade 8 mounting hardware.

Forged steel construction, as supplied to the British Military, includes Grade 8 mounting hardware.

This ability to stretch is a distinction between a snatch strap and a tow strap, ARB snatch straps are elastic when under load whereas a tow strap is not, the benefits of which are twofold. Firstly, the kinetic energy generated by the elasticity actually aids the recovery itself, and secondly, the elasticity greatly reduces the likelihood of vehicle damage during recovery. The enormous weight of each 4x4 and the weighted force of whatever caused the immobilization puts enormous strain on the point where the straps are attached, and without some elasticity, there is a substantial risk of damaging the vehicle. For vehicle recovery, a snatch strap is a must- and quality counts.
All ARB snatch straps are woven and fabricated to ARB specifications, and tested by a NATA approved laboratory. The 17,500 lb model (ARB705) is recommended for most vehicles, with the 24,000 lb strap (ARB710) better suited to heavier applications.

The Pull Pal, a well-engineered anchoring tool, is both portable and well-suited for a wide range of environments. Intended as a tool for winching through sand and mud, Pull Pal's design relies on useful rules of physics. Its hefty plow blade sets firmly and safely into sand, clay, mud, hardpan soil and snow. Pull Pal gets you up and over hill stalls and minimizes dangerous situations. It allows you more control -- even when you are alone. Saves time, transmissions, and tires. The RW11,000 size unit is 45" x 7" folded; Spade 10" x 24", weighs only 36 lbs, and is recommended for 4 x 4 mid-size trucks. The Pull-Pal comes with a detachable spade and folds to the size of an ordinary bumper jack for easy storage. Designed to work in most types of ground (including sand, hard-pan soil and even snow.) It can be used to extract your vehicle as well as an anchoring point from the rear when winching another vehicle out.

Watch movie (wmv 2.7MB)

Dual purpose mechanism made from zinc plated box section steel. Cleverly folds to act as an anchor for the vehicle when pulling. Or when laid flat it doubles as a useful track to help you get out of tricky situations.

A kit of sturdy components to give your winch an anchor point when there's no other secure location within reach. Zinc plated steel components.