This rugged work lamp features a tilt & swivel base, constructed from high-impact ABS, integral handle, waterproof external switch.6-12-24 volt, requires H3 bulb in your choice of wattage (not included).

Turn night into day with this super-bright 100 watt spotlight. The built-in remote control rotates the beam a full 340 degrees on the horizontal axis and 75 degrees vertically. Plugs into cigar lighter with it's included 15 ft. cord with power switch and joystick remote to adjust the aim. Mounts to the vehicle with a super strong suction mount. Includes folding carry handle, 6" glass lens-reflector unit and features a built-in spare element. 10" H x 7" W. Off-road use only.

6" diameter lamps available in clear driving, clear fog, or amber fog. Complete kit includes covers, switch, wiring, relay, and hardware.
RRA006H - Yellow Fog Lamps
RRA007H - Clear Fog Lamps
RRA008H - Clear Driving Lamps

Another quality lamp from VisionX, the RRA008BK is 6.5" diameter and all metal construction. Value priced, but packs a 100 watt punch. Grilles are removable and the wiring is protected by a steel sheath. Sold in pairs.

7" lamp constructed from tough ABS - will not rust. Lamp covers and 55 watt bulbs included. Sold in pairs.

8.5" lamp constructed from tough ABS - will not rust. Lamp covers and 55 watt bulbs included. Sold in pairs.

RRA008W - Big 8" lamps with metal housings finished in durable black powder-coat. Powerful 55 watt bulbs turns night into day. Includes removable fitted stone guards. For Off-Road use only. Sold in pairs.

RRA008WS - Big 8" lamps with polished stainless steel housings. Powerful 55 watt bulbs turns night into day. Includes removable fitted stone guards. For Off-Road use only. Sold in pairs.

* All glass lens
* Highly polished reflector
* High-impact ABS housing
* Heavy duty 14 gauge wire
* Clear “stealth” cover included
H11 Quartz Technology incorporated into the 9900 series lamp. New generation H11 55w bulb provides 99,000 candela output, far superior to previous halogen lamps. RRA9911

* All glass lens
* Highly polished reflector
* High-impact ABS housing
* Heavy duty 14 gauge wire
* Clear “stealth” cover included
High Intensity Discharge with built-in ballast. Brighter and longer range than a 130 watt lamp with 60% less current draw. Emits 220,000 candela. RRA9900

Vision X, the ultimate H.I.D. Off-road Lighting System for competition & trail. With two available models, the RRA008HID6 (6.7") & RRA008HID8 (8.7"), the series is designed to completely meet the demands of any off-roader through optimum durability, performance and affordability. The tough die-cast aluminum housing off-road series lights feature the industry’s first integrated ballast without sacrificing mounting depth. Additional mounting time, material & space required for separate ballasts are now extinct. The mounting depth at 3.4" on each off-road series light is still shallower than any other non integrated ballast HID light on the market! Sold individually.

Adding another set of lamps to your Rover and don’t want to install an ugly switch and run wires all over? Our new Smart Switch Relay Kit solves all your problems. Simply tap the signal wire from the relay to any other circuit- parking lamps, headlamps, etc. and you can turn your auxiliary lamps on remotely!Simply turn your headlights on-off-on again and your auxiliary lights will automatically come on! - click your lights off-and on again, and your auxiliary lights go off. All this with a simple 4 wire hook-up.  This kit also means you don’t have to pass wires through the firewall to add unsightly switches… or risk adding permanent modifications to leased vehicles.

A rugged, highly versatile jack, 7000 lb. capacity, can be used for lifting, pulling or winching, NATO approved.

The 48" Hi-Lift Extreme Edition is an All-Cast version that comes standard with a unique Winch/Clamp/Spreader attachment for clamping and spreading with the Jack. It features a metallic gray powder-coat finish and a gold zinc-plated handle and clamp. The 48" Hi-Lift Extreme Edition also features a hinged, quick-release base pin instead of the standard cotter pin for easier removal of the jack base.

A convenient mounting and locking device for storage of your Hi-Lift Jack. Installation is simple.  It can be mounted horizontally or vertically, with or without a Jack Protector.  Your Hi-Lift Jack is mounted in the Loc-Rac to deter theft.  It also places the Jack in an easy to reach location.

The Hi-Lift 4XRAC is designed for serious off-roaders who are looking for an easy, inexpensive way to stow their Hi-Lift Jack in a convenient, secure location. Mounting brackets are slotted for adjustment. Velcro handle strap secures handle to jack bar. Each kit contains 2 mounting brackets, 2 mounting bracket caps, a Velcro strap for securing the Hi-Lift's handle and all necessary mounting hardware.

The Bumper Lift is designed to fit most steel curved bumpers, for quick and easy lifting.  The Bumper Lift has a 3,000lb(1361 kg) capacity. When used with the Hi-Lift Jack, which is not itself designed to be used on curved bumpers, the Bumper Lift makes raising one wheel of most average sized vehicles up to 2" (5 cm) above the ground an easy task.

Now lift late-model vehicles with the Hi-Lift jack! Plastic bumpers and extreme lift-kits are no longer a problem. The Lift-Mate is designed to operate in a manner that allows the vehicle to be lifted directly from the wheel, greatly reducing the amount of travel up the jack bar. 
- Lift Capacity: 5000 lbs.(2273 kg)
- Rubber-Coated hooks to protect the wheel.
- Rubber pad for protecting the tire and wheel.

SINK NO MORE! The Off-Road Base from Hi-Lift Makes the "original power tool" even more versatile! Convenient to use, easy to store. Rugged construction meets Hi-Lift Jack specifications for strength & durability. Use the Hi-Lift Off-Road Base to alleviate jack sinkage on soft ground.

Everything You Need to Winch with the Hi-Lift Jack - All in one convenient case! Use the Off-Road Kit to turn your Hi-Lift Jack into an even more versatile tool. This kit keeps all of the needed parts for winching at arms reach. Includes: Winch Tensioner, Custom Nose Attachment, 8 ft. Tree Saver Strap, Hi-Lift Gloves, Hardware & Gear Bag.

Protects your Hi-Lift Jack from weather, mud, and dirt. Made of durable vinyl-coated nylon, the Jack Protector is waterproof, as well as mildew and decay resistant.

A "must-have" for any Hi-Lift owner, it slips over the top clamp and onto the beam, and keeps the handle in a secured,  up-right position. Can be removed quickly and easily without removing the top clamp, a feature that the imitators cannot claim.

ORDER HOTLINE 800-955-2818 (for orders only)
All other inquiries call  802-885-6660
Monday - Friday, 8AM - 6PM Eastern Time (USA)

Prices, availability, specifications, and applications subject to change without notice.
Manufacturer part numbers used for reference only. Shipping not included in price.
"Land Rover", "Range Rover", "Discovery", "Defender", "Freelander"
are registered trademarks of Land Rover North America.
Web site and photos Copyright © 1998-2008 D.A.P. Enterprises LLC