Galvanized steel frame construction with a dimpled, molded rubber tread inset. Also has a rubber edge molding. Easy to install as it mounts to body mounting bolts in the chassis, two holes need to be drilled through the outrigger for mounting. (not applicable to Range Rover Long Wheel Base)

Sturdily constructed of light weight aluminum with rubber tread plates and end caps. Attaches easily to chassis with a minimum amount of drilling. (not applicable to Range Rover Long Wheel Base)

All steel construction with a ribbed rubber tread plate and outer casing. Supplied with all hardware and easily installed. Fits LWB only.

The best solution for those weekend trips that require you carry some extra gear. These sturdy lightweight bars accept the accessories below, are easily installed, and compactly stow away.
BA043A - Range Rover Classic - $115.95 pair
BA3094 - Range Rover 4.0/4.6   (mounts in roof track) - $179.95 pair
BA3099 - Discovery Series I  - $225.00 pair

A carrier basket with many uses, this luggage tray features a quick-release design. The end tubes can be easily positioned to create either a basket or a flat carrier for long loads. Manufactured from lightweight aluminum, aerodynamic and rust-free. 40" x 40". Requires Roof Bars shown above.

The BA052 is a frame mounted bike carrier with three-point fixation. The adjustable frame holders fit most frames and has protective rubber coating on the inside. It is made of galvanized steel and black powder painted. The sturdy tubular structure together with adjustable wheel straps holds the wheels firmly secured. The BA052 makes it easy to load and secure the bike. Requires Roof Bars shown above.

The BA3102 is a new simple ski carrier that is as quick to fit as it is easy to load. It has a pushbutton opening mechanism that is easy to operate through thick skiing gloves. Wide rubber sections protect the skis, and have room for ski bags. A double locking action locks the skis and the ski carrier to the load carrier. Carries 4 pair of skis or 2 snowboards. Requires Roof Bars shown above.

The e-code 7" headlamps will brighten up your nightlife if you drive a Series, Range Rover Classic or Defender. Offering you a choice of bulb wattage, these housings have a far superior beam pattern to the U.S. version. Although not approved for road use, the beam pattern has a distinct cutoff that reduces the possibility of blinding oncoming drivers when using high wattage off-road bulbs. Includes Hella Premium Xenon 60/55 DOT-Approved bulbs. Combine with our H4 Upgrade Harness for the absolute ultimate in night time vision. Sold in pairs. Intended for off-road use only.

With our new H4 wiring harness, you can improve your headlamps 20% absolutely legally. No illegal overpowered bulbs that melt wiring here - just install our H4 Upgrade Harness and your bulbs will now run directly from the battery. By avoiding the current draw through the switch of your Range Rover Classic, Discovery (pre-03) or Defender, your headlamp switch will last longer too. The harness is preassembled and installs easily. Hella relays for reliability and an inline fuse holder for safety. If you use bulbs with higher wattage ratings than the original 55W/65W originals, you should seriously consider this wiring upgrade.

This rugged work lamp features a tilt & swivel base, constructed from high-impact ABS, integral handle, waterproof external switch.6-12-24 volt, requires H3 bulb in your choice of wattage (not included).

Turn night into day with this super-bright 100 watt spotlight. The built-in remote control rotates the beam a full 340 degrees on the horizontal axis and 75 degrees vertically. Plugs into cigar lighter with it's included 15 ft. cord with power switch and joystick remote to adjust the aim. Mounts to the vehicle with a super strong suction mount. Includes folding carry handle, 6" glass lens-reflector unit and features a built-in spare element. 10" H x 7" W. Off-road use only.

6" diameter lamps available in clear driving, clear fog, or amber fog. Complete kit includes covers, switch, wiring, relay, and hardware.
RRA006H - Yellow Fog Lamps
RRA007H - Clear Fog Lamps
RRA008H - Clear Driving Lamps

Another quality lamp from VisionX, the RRA008BK is 6.5" diameter and all metal construction. Value priced, but packs a 100 watt punch. Grilles are removable and the wiring is protected by a steel sheath. Sold in pairs.

7" lamp constructed from tough ABS - will not rust. Lamp covers and 55 watt bulbs included. Sold in pairs.

8.5" lamp constructed from tough ABS - will not rust. Lamp covers and 55 watt bulbs included. Sold in pairs.

RRA008W - Big 8" lamps with metal housings finished in durable black powder-coat. Powerful 55 watt bulbs turns night into day. Includes removable fitted stone guards. For Off-Road use only. Sold in pairs.

RRA008WS - Big 8" lamps with polished stainless steel housings. Powerful 55 watt bulbs turns night into day. Includes removable fitted stone guards. For Off-Road use only. Sold in pairs.

* All glass lens
* Highly polished reflector
* High-impact ABS housing
* Heavy duty 14 gauge wire
* Clear “stealth” cover included
H11 Quartz Technology incorporated into the 9900 series lamp. New generation H11 55w bulb provides 99,000 candela output, far superior to previous halogen lamps. RRA9911

* All glass lens
* Highly polished reflector
* High-impact ABS housing
* Heavy duty 14 gauge wire
* Clear “stealth” cover included
High Intensity Discharge with built-in ballast. Brighter and longer range than a 130 watt lamp with 60% less current draw. Emits 220,000 candela. RRA9900

Vision X, the ultimate H.I.D. Off-road Lighting System for competition & trail. With two available models, the RRA008HID6 (6.7") & RRA008HID8 (8.7"), the series is designed to completely meet the demands of any off-roader through optimum durability, performance and affordability. The tough die-cast aluminum housing off-road series lights feature the industry’s first integrated ballast without sacrificing mounting depth. Additional mounting time, material & space required for separate ballasts are now extinct. The mounting depth at 3.4" on each off-road series light is still shallower than any other non integrated ballast HID light on the market! Sold individually.

We strongly recommend fitting IPF light stays to the larger range of lights, where long distance, corrugated terrain is to be encountered. Light stays attach to nearly any off-road lamp and secure it to the roof rack, grille or bumper of the vehicle. They stabilize the lamp and in many cases will prevent premature failure of the alignment or attachment points when traversing rough terrain. The often overlooked details such as lamp stays that make the obvious difference between a professionally kitted expedition vehicle and an amateur. Available in 145mm (ARBBK4) and 245mm (ARBBK5).

Adding another set of lamps to your Rover and don’t want to install an ugly switch and run wires all over? Our new Smart Switch Relay Kit solves all your problems. Simply tap the signal wire from the relay to any other circuit- parking lamps, headlamps, etc. and you can turn your auxiliary lamps on remotely!Simply turn your headlights on-off-on again and your auxiliary lights will automatically come on! - click your lights off-and on again, and your auxiliary lights go off. All this with a simple 4 wire hook-up.  This kit also means you don’t have to pass wires through the firewall to add unsightly switches… or risk adding permanent modifications to leased vehicles.

ORDER HOTLINE 800-955-2818 (for orders only)
All other inquiries call  802-885-6660
Monday - Friday, 8AM - 6PM Eastern Time (USA)

Prices, availability, specifications, and applications subject to change without notice.
Manufacturer part numbers used for reference only. Shipping not included in price.
"Land Rover", "Range Rover", "Discovery", "Defender", "Freelander"
are registered trademarks of Land Rover North America.
Web site and photos Copyright © 1998-2010 D.A.P. Enterprises LLC